8/9/2019 | 1 MINUTE READ

Video: Metal AM Affects Plastics Production via Conformal Cooling

Additive manufacturing allows cooling channels within mold tooling inserts to follow the form of the tool rather than being straight drilled holes. Here’s why this matters.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
3D printed conformal cooling mold insert

Mold insert with conformal cooling channels that can be seen in the transparent model in the foreground.

Additive manufacturing (AM) allows cooling channels within mold tooling inserts to follow the form of the tool rather than being straight drilled holes. I filmed this video discussing conformally cooled mold inserts in the AM machine demo area of the U.S. headquarters for Matsuura:

 

Transcript

I’m at Matsuura. One of the most significant impacts of metal additive manufacturing is going to be on plastic part production. I’m referring to conformal cooling, the chance to use additive manufacturing to build conforming cooling channels into an injection mold component. More effective cooling potentially means seconds per part shaved from the injection molding cycle, the cycle making a plastic part. Seconds per part might not sound like much, but multiply that across millions of parts that might be made through injection molding, might be made using a tool like this, and the result could be production so much faster that fewer injection molding presses would be needed to achieve the same production in the same amount of time.

One other feature of this machine from Matsuura: It is a hybrid machine. In addition to building additively, it also mills as it goes, machining the part to completion within the same cycle. The result can be considerable lead time savings for the chance to make this component complete all in one cycle as opposed to different setups for machining, EDM, heat treating.

RELATED CONTENT


Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from Additive Manufacturing in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

Resources