9/2/2019 | 3 MINUTE READ

Video: Can 3D Printed Parts Hold Self-Tapping Screws?

Automotive light maker Varroc Lighting Systems will soon begin using additive manufacturing for plastic production parts fastened into assemblies. Here are the results of its tests with self-tapping screws.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Production parts need fasteners. This point might seem basic, but it is a factor that will affect whether additive manufacturing (AM) can advance into large-scale production. In this video, Varroc Lighting Systems describes the findings of its experiments with fastening polymer 3D printed parts, specifically test pieces made of Carbon’s EPX 82 epoxy and HP’s PA12-GB nylon.

Transcript

Peter Zelinski, Additive Manufacturing

To make production parts, that implies assembly, and the need to work with these 3D printed components in assembly is what got you thinking about fasteners, thinking about screws. Talk to me about the experimentation you’ve done related to fastening.

Dylan Schickel, Varroc Lighting Systems

My job in our company is working on new manufacturing processes and innovation, and any time I’m looking at a new process I have to get down to the nuts and bolts….

Peter Zelinski

So to speak.

Dylan Schickel

Exactly. To understand, where are the limitations. What’s the state of the art? When we started looking at these 3D printing processes and trying to understand how can we make useful end parts, we realized there was actually something missing at the nuts-and-bolts level. Historically people who use rapid prototyping processes might glue parts together. They might sometimes with really big fasteners print some threads. They might use brass inserts: Much as we see here, we can put brass inserts in plastic very well and it works really nice. The challenge with that is it’s not easy to imagine industrializing that in a cost-competitive way.

So, we said, why can’t we use what we already know? We use a lot of screws in the 3 to 4-mm range. They’re self-tapping screws. We said, OK, let’s make some bosses with self-tapping screws. Let’s find out what works and what doesn’t work. We did kind of a detailed technique that we know from our injection molding background where we will drive the fastener using a torque-controlled tool. We’ll graph the curve to understand how it works, understand how it threads together, what the retention torque is, what the stripping torque is, and going through all of that detail work. And from the initial work, it looks like the self-tapping screws worked just fine.

Then we said, we need to know something about the process window. So we reached out to a couple of our partners, Carbon directly and 3D Parts Unlimited for HP Multi Jet Fusion parts. They printed some of these boss plates for us. We tested varying diameters. We tested multiple replicates so we could get a statistical sample size and we’re able to understand what the process window is and what the design window is for driving self-tapping screws, particularly in Carbon DLS and HP MJF parts.

Peter Zelinski

You told me about how you discovered actually a 3D printed boss has the potential to hold a self-tapping screw better than an injection molded one.

Dylan Schickel

It was really surprising for us. On the small end of the boss diameter, we didn’t get breakage. What happens in the injection mold is the boss, which is essentially a hollow cylinder, is formed by a part of the mold called the core pin. When the plastic melt flows around it on the far side, the melt knits together. We get what’s called the knit line and that knit line can be a weak point. But it turns out, with the printed bosses, there’s no knit line. By the fundamentals of the process, we’re building them in layers and we tried Z direction, we tried X direction — it didn’t matter. We found out that with these processes the material properties were actually in a certain way a little more isotopic than even the injection molded parts.

RELATED CONTENT


Resources