Aitrtech
Published

10 Years Producing Hip Implants Through AM

There is already heritage in additive manufacturing. AM is taken seriously today in part because early users such as Lima Corporate have proven it.

Share

When it comes to production parts made through AM, the success of the application often is not as well established as the appearance of the part would suggest. Making a part through 3D printing is one thing. Achieving a process that will produce that part to demanding specifications and do so consistently is more challenging. The difference accounts for why usable 3D-printed parts are common, while established 3D-printing production processes are less so.

But there is a flip side to this. Those production AM processes that are established frequently have been established for longer than one might expect. The reason why AM seemed to catch on several years ago as a viable and promising production option is because manufacturers in various sectors had been working for years earlier to develop and prove out industrial applications of what would come to be called AM.

This year, one example of that pioneering work arrives at a milestone. It was 10 years ago that Italian medical device manufacturer Lima Corporate brought to market its first hip implant component produced through additive manufacturing. Additive allows the titanium cup of a hip implant to be made with precise surface geometry carefully engineered to encourage the growth of the patient’s bone into this surface. The specific process the company uses to make implants in this way is electron beam melting (EBM) on machines from Arcam. The company now manufactures various joint replacement implant components on 15 EBM machines. And in the time since it began, various other medical manufacturers have advanced with their own 3D-printed implant products. Indeed, Arcam president and CEO Magnus René says AM for medical implants is farther along than most manufacturers realize.

“People have two misconceptions about implants produced additively,” he says. “First, they think additive is solely for custom implants. It’s not.” In the medical industry, mass production of implant cups is far and away the most widespread use of EBM. “Second, people think additively produced implants are not approved by regulators.” Not only are AM implants approved for patients in Lima’s European market, he says, they are also approved in Japan, Australia, China and by the United States’ FDA.

Yet adoption has advanced only gradually, for various reasons he cites. The medical industry is understandably risk-averse, while insurance companies are not just risk-averse but cost-averse as well. Metal AM remains a relatively expensive process. Meanwhile, one other factor he sees helps account for why the Italian company was an early success. In the United States, hip implants are produced by a few large companies that would have to invest significantly to embrace a new manufacturing approach. In Europe, by contrast, hip implants are made by smaller companies that can change more nimbly. (He observes that spine implants in the United States are made by companies that are smaller, and these have moved into 3D printing more quickly.)

The use of AM for medical implants will continue to advance, he says. He sees this in the investments medical manufacturers are making in additive equipment, and the plans they are making for future products produced through AM. Plus, while additive technology steadily improves and can be expected to get less expensive, traditional implant manufacturing processes will continue to have their traditional drawbacks. Namely, these processes need dedicated tooling for steps such as forging, and they entail a range of operations from forging through various machining steps through plasma spray. AM can replace this with a tooling-free process consisting of just 3D printing and light machining. 

Given all of this, the full adoption of AM for implant production is not a bold expectation in his view, but a reasonable inference from current trends. 

“In five to 10 years,” he says, “I expect that all implants will be made additively.” 

UPM Additive Solutions
Acquire
Airtech
The World According To
AM Radio
The Cool Parts Show

Related Content

SLS

More Affordable Suture Anchors 3D Printed from PEKK: The Cool Parts Show #60

Selective laser sintering (SLS) of polyether ketone ketone (PEKK) is being used to produce medical implants that are more cost effective and perform better than their conventional counterparts. We highlight fasteners known as suture anchors in this episode of The Cool Parts Show. 

Read More

3D Printed PEEK Spine Implants in Production: The Cool Parts Show Bonus

Curiteva is using Fused Strand Deposition to produce two different lines of FDA-cleared spine implants. We visited the company’s Huntsville, Alabama, facility to learn more.

Read More
Cool Parts

Understanding PEKK and PEEK for 3D Printing: The Cool Parts Show Bonus

Both materials offer properties desirable for medical implants, among other applications. In this bonus episode, hear more from Oxford Performance Materials and Curiteva about how these companies are applying PEKK and PEEK, respectively. 

Read More
Cool Parts

FDA-Approved Spine Implant Made with PEEK: The Cool Parts Show #63

Curiteva now manufactures these cervical spine implants using an unusual 3D printing method: fused strand deposition. Learn how the process works and why it’s a good pairing with PEEK in this episode of The Cool Parts Show. 

Read More

Read Next

Artificial Intelligence

Carnegie Mellon Helps Industry, Students Prepare for a Manufacturing Future with AM and AI

Work underway at the university’s Next Manufacturing Center and Manufacturing Futures Institute is helping industrial additive manufacturers achieve success today, while applying artificial intelligence, surrogate modeling and more to solve the problems of the future.

Read More
Postprocessing

How Avid Product Development Creates Efficiencies in High-Mix, Low-Volume Additive Manufacturing

Contract manufacturer Avid Product Development (a Lubrizol company) has developed strategies to streamline part production through 3D printing so its engineering team can focus on development, design, assembly and other services. 

Read More
Casting

New Equipment, Additive Manufacturing for Casting Replacement and AM's Next Phase at IMTS 2024: AM Radio #54

Additive manufacturing’s presence at IMTS – The International Manufacturing Technology Show revealed trends in technology as well as how 3D printing is being applied today and where it will be tomorrow. Peter Zelinski and I share observations from the show on this episode of AM Radio. 

Read More
Airtech International Inc.