Thermwood and U.S. Navy Complete Validation for AM Marine Program
The validation program centered on printing an unclassified scale nose of a submarine using Thermwood’s Large Scale Additive Manufacturing (LSAM) system.
Share
Read Next
Thermwood Corp. has entered into a collaborative program with the Naval Surface Warfare Center, Carderock Division to explore the use of additive manufacturing technology in developing marine models for ship and ship systems testing.
The initial validation program was centered on printing an unclassified scale nose of a submarine using Thermwood’s Large Scale Additive Manufacturing (LSAM) system, an industrial additive manufacturing system intended for the production of large-scale components. The part was printed using 20 percent carbon fiber-filled ABS in 11 hours and 45 minutes using traditional horizontal layer printing and a 40-mm melt core. Final trim required 5 hours. Both printing and trimming were completed on the same machine, using Thermwood’s 10 × 20-ft. LSAM at its demonstration lab in Southern Indiana.
Because of layer cooling requirements, the print rate for this part was less than half of the maximum rate the machine is capable of, according to Thermwood. The company expects that, moving forward, the program will include the printing of additional components using both horizontal and vertical layer printing.
This story originally appeared on compositesworld.com.
Related Content
-
Evaluating the Printability and Mechanical Properties of LFAM Regrind
A study conducted by SABIC and Local Motors identified potential for the reuse of scrap reinforced polymer from large-format additive manufacturing. As this method increases in popularity, sustainable practices for recycling excess materials is a burgeoning concern.
-
Robot Deposition Makes Giant Industrial Mixer Blade: The Cool Parts Show Bonus
Wire arc additive manufacturing produces a large component formerly made through casting, and allows for redesign of its internal cooling geometry.
-
World’s Largest Metal 3D Printer Seen at Ingersoll Grand Opening Event
Maker of large additive and subtractive machines adds capacity in Rockford, Illinois.