12/20/2019 | 1 MINUTE READ

"Stereolithography for Metals" Produces Detailed Parts

Lithography-based Metal Manufacturing (LMM), a new technique developed by Incus uses a curing process based on stereolithography to build green metal parts with photopolymer. 

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
3d printed cutting tool with coolant channels made by Incus

A new process developed by Incus promises the fine detail of stereolithography with any metal that can be sintered. (See this coolant-through cutting tool and more in our video roundup of “cool parts” from Formnext 2019.) 

Stereolithography and similar resin-based 3D printing processes are known for building detailed, high-resolution parts in polymer. Now, Incus is leveraging many of the same benefits for metals, with a new process that combines photopolymer resin and metal powder. 

Incus, a spinout from ceramics 3D printing company Lithoz, unveiled its Lithography-based Metal Manufacturing (LMM) process at Formnext 2019. Dr. Gerald Mitteramskogler, CEO, explained the process to me. 

The key to LMM is its feedstock: photopolymer resin filled with metal powder. Unlike most SLA resins that are liquid during the printing process, this material remains solid but spreadable within the 20°C build chamber. “It’s a consistency like butter,” Mitteramskogler says.

A blade spreads the stock over a heated build plate. The photopolymer is cured with a digital light projection (DLP) engine to form each layer. 

Incus diagram

The spreadable feedstock is cured with light, similar to stereolithography, in a process that resembles powder bed fusion or binder jetting. Image: Incus

The polymerized green parts emerge from the printer in a block of material; an infrared light can be used to liquify the uncured material and quickly free them. 

From there, the process looks more like binder jetting. Green polymerized parts are debound and sintered in a regular metal injection molding (MIM) furnace. The quality of LMM parts is similar to those made via MIM, with the benefits of the geometric freedom and speed enabled by 3D printing. 

3d printed items made by Incus

Similar to binder jetting, Lithography-Based Metal Manufacturing is suitable for small, finely detailed parts such as dental brackets, hinges for glasses, jewelry and watch faces like the one shown here. 

Incus currently has four beta printers in the field, printing with 316L stainless steel. Additional materials are in development including titanium, tungsten, copper and precious metals. Lithography-based Metal Manufacturing is possible with any metal that is sinterable, Mitteramskogler says. 

8 Cool Parts from Formnext 2019

Editors Peter Zelinski and Stephanie Hendrixson round up some of the coolest parts they spotted at Formnext 2019. See the cutting tool pictured above and more in this special edition of The Cool Parts Show. WATCH

RELATED CONTENT

  • AM 101: Binder Jetting

    Binder jetting requires no support structures, is accurate and repeatable, and is said to eliminate dimensional distortion problems common in some high-heat 3D technologies. Here is a look at how binder jetting works and its benefits for additive manufacturing.

  • The Possibilities of Electron Beam Additive Manufacturing

    With dual-wire material feed now allowing for options including blended metal alloys, the metal-deposition process for large-part additive manufacturing continues to forge ahead.

  • Magnetic 3D Printing with Fiber Reinforcement Fills Tooling Gap

    Fortify’s Digital Composite Manufacturing (DCM) platform pairs high-performance resins with fiber reinforcement that can be controlled at the voxel level. The process promises a faster route to durable injection mold tooling.


Resources