11/9/2016 | 1 MINUTE READ

Molder’s Experience Illustrates How AM Will Interact with Other Advances

Additive manufacturing is not moving forward in isolation. It will leverage and work in harmony with other manufacturing technologies that are also moving forward.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

One reason why it’s so hard to predict the ultimate impact additive manufacturing will have is because AM technology will synergize with the advance of other technologies, including some we are not watching closely. Scott Kraemer, directing manager of new technology for PTI Engineered Plastics, illustrated this point with his presentation at the most recent Additive Manufacturing Conference. AM in combination with some other advance might sum to a process improvement that wasn’t expected, just as his company recently experienced.

He spoke on PTI’s use of AM to make injection mold tooling with conformal internal channels for improved cooling. His presentation included what seemed like a long diversion that was not about additive at all, in which Kraemer discussed PTI’s investigation of spot cooling of molds using liquid carbon dioxide. As the audience came to see, this was no diversion, because the PTI team ultimately hit upon the promise of bringing AM and CO2 cooling together. In place of additively growing mold inserts that have conformal cooling channels for water, the team members discovered they could instead make mold inserts hollow, allowing CO2 to cool the tool by expanding into a completely open inner volume.

A hollow mold tool was initially a strange idea to the moldmakers here, but testing has shown that this idea for how to make a mold insert through AM holds considerable promise for reducing molding cycle times.

In a similar way, it seems plausible to predict that additive manufacturing might also find synergies with the advance of robots and digital manufacturing to produce solutions that also seem strange relative to our expectations today.

RELATED CONTENT

  • AM Design May (Finally) Launch the Aerospike Engine

    A team of engineers turns to additive design to create—and successfully test—“the holy grail of the spaceship movement.”

  • The Future of Manufacturing

    According to engineers with GE Aviation, the challenges of additive metal manufacturing—serious as they are—are small compared to the promise that this technology holds. How else can you make a plane engine 1,000 pounds lighter?

  • Simulation Supports Custom 3D-Printed Knife

    Build simulation revealed that distortion was likely to occur in this custom chef’s knife. Thermal shrouding and an unusual support structure were used to counter it.


Resources