7/25/2019 | 1 MINUTE READ

July 2019 Issue Explores Robots and 3D Printing

The latest issue of Additive Manufacturing magazine explores the interplay between robots and 3D printing, from part handling to robot as 3D printer. 

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

3D printing and automation share some of the same promise – reduced labor, unattended operation, more efficient workflows. But what happens when 3D printing and robots intersect?

The latest issue of Additive Manufacturing magazine explores this interplay. Our cover story details how Evco, an injection molder, was able to integrate a cell of six printers with a cobot to run 24/7. As a result, the company can now take on different types of plastic part production that wouldn’t have been possible before.

But part unloading isn’t the only way that robots enter into AM. Other stories in this issue include:

  • Addere’s robot-based metal 3D printing system uses standard weld wire to build large parts, with a deposition rate that can reach 50 lbs/hr.
  • Research into robot “swarms” could enable a new, ultra-efficient era of 3D printing and automated manufacturing.
  • Formalloy is exploring multimaterial metal 3D printing and new ways of thinking about design with powder-based deposition technology, now compatible with robotics.
  • Custom 3D-printed grippers made in-house are allowing Bilstein of America to get the most out of its cobots.

Also in this issue: The use of CT scanning to inspect open areas in 3D printed parts, results from a case study on 3D printed autoclave tooling, and your guide to the 2019 Additive Manufacturing Conference + Expo coming up in August. 

Read it here and subscribe to receive the next issue in your mailbox or inbox.

RELATED CONTENT


Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from Additive Manufacturing in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

Resources