Hybrid Manufacturing in the Spotlight at Canadian AM Forum
PTooling's hybrid machining center became the centerpiece of an AM forum and open house held at the company's Ontario facility.
.jpg;width=70;height=70;mode=crop;format=webp)
PTooling opened its Ontario shop to Canadian and international manufacturing professionals interested in additive manufacturing. A mural depicting some of the company’s key employees greets visitors just inside the door.
Marv Fiebig, president of PTooling, spoke to visitors about the company’s decision to purchase a hybrid manufacturing machine and the results it has seen so far.
PTooling’s Lasertec 65 3D from DMG MORI was the first of this model in North America, and remains the only Lasertec purchased on the continent so far producing parts for external customers.
The Lasertec 65 3D has a laser deposition head fed with metal powder to additively build parts and features. The machine was running during the open house producing souvenirs for visitors.
Share
Read Next
Manufacturers from Canada and the United States gathered at PTooling’s Amherstburg, Ontario, facility April 27-28, to see hybrid manufacturing technology in action and participate in the Additive Manufacturing Forum. Jointly hosted by Canada Makes and the WindsorEssex Economic Development Corporation, the event included presentations from Marv Fiebig, president of PTooling; Dr. Gregory Hyatt, senior vice president and CTO of advanced solutions development for DMG MORI USA; and Matthias Kuehnelt of Hoedtke GmbH & Co. KG.
Fiebig focused his talk on what was in many ways the centerpiece of the event, PTooling’s DMG MORI Lasertec 65 3D hybrid. The machine combines CNC milling capabilities with a powder-fed laser deposition head to enable both additive and subtractive operations in the same cycle. PTooling’s became the first Lasertec additive manufacturing machine to be installed in North America when the company took delivery of it in December 2015. Now, it is one of three on the continent, but it remains the only one producing parts for external customers (the other two are captive machines owned by SpaceX and Boeing).
Fiebig’s presentation described PTooling’s experience with the Lasertec and how additive manufacturing has affected its business. The company primarily serves the oilfield industry, but Fiebig says the hybrid is opening up other possibilities in industries such as aerospace and plastics molding. He is also finding that new customers are now seeking out PTooling because of this capacity. Hosting the forum and open house was another way to help educate colleagues and potential customers about the technology.
Dr. Hyatt looked to AM’s future, drawing comparisons between additive manufacturing today and the automotive industry in the early 20th century and arguing that additive is on its way to being democratized the way that the auto industry eventually was. “We’re 80 percent of the way there,” he said, citing AM’s current capabilities to build on existing structures, incorporate multiple materials and integrate subtractive machining.
What will it take to achieve the remaining 20 percent? Cost per part must continue to come down and work envelopes must increase. Software that is easy to use and supports both AM and subtractive machining must be available. Robust machines that can handle 24/7 production must be developed. Hyatt also spoke to how DMG MORI is working to address these remaining concerns to help bring AM into production.
Matthias Kuehnelt of Hoedtke spoke about the company’s research into best practices for hybrid manufacturing. Hoedtke, based in Germany, also owns a Lasertec 65 3D and has performed extensive testing on this machine with regard to both its additive and subtractive capabilities. Kuehnelt presented results from various tests exploring how parameters such as table movement and the direction of deposition affect the strength and quality of additive parts.
The event concluded with a Q&A session with the three speakers, and tours of PTooling’s facility. The organizers plan to make the additive manufacturing forum an annual event, and PTooling expects to host it again next year.
Related Content
-
VulcanForms Is Forging a New Model for Large-Scale Production (and It's More Than 3D Printing)
The MIT spinout leverages proprietary high-power laser powder bed fusion alongside machining in the context of digitized, cost-effective and “maniacally focused” production.
-
3D Printed Cutting Tool for Large Transmission Part: The Cool Parts Show Bonus
A boring tool that was once 30 kg challenged the performance of the machining center using it. The replacement tool is 11.5 kg, and more efficient as well, thanks to generative design.
-
New Zeda Additive Manufacturing Factory in Ohio Will Serve Medical, Military and Aerospace Production
Site providing laser powder bed fusion as well as machining and other postprocessing will open in late 2023, and will employ over 100. Chief technology officer Greg Morris sees economic and personnel advantages of serving different markets from a single AM facility.
