10/29/2018 | 3 MINUTE READ

GW Plastics Bets on Metal 3D Printing for Conformal Cooling

Originally titled 'GW Plastics Bets on Metal 3D Printing'

An investment in a hybrid metal 3D printer is enabling moldmaker GW Plastics to produce better-performing molds with conformal cooling.


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

In response to growing demand in its global medical-device and drug-delivery business, precision custom molder GW Plastics has made a substantial investment in 3D metal printing at its Royalton, Vermont, captive moldmaking facility. The purpose is to build injection molds with conformal cooling for faster cycles.

GW is one of only a handful of precision mold builders that have invested in this technology. “We are in the precision molding business, and cycle time is paramount. We see it as in our best interest to lead the charge into 3D metal printing and conformal cooling,” says Timothy Holmes, vice president of engineering.

“That means faster cycles and better part quality through more predictable part shrinkage and warpage, so we won’t have to design molds with deliberate distortions to counteract shrink and warp.” he says. “Ultimately, that will mean faster time to market for our customers.”

GW Plastics has invested over $2 million in its Royalton mold facility over the last 12 months to support R&D and expand capacity. About half that amount went into a “hybrid” machine that both laser sinters metal powders and performs finish machining—“as good as any CNC,” Holmes says—as well  as an environmentally enclosed room for the machine that has controlled humidity and protects the valuable metal powder—which is reused after every part build—from contamination.

“Our vision for metal 3D printing,” Holmes says, “is selective use of this technology for geometry-dependent conformal cooling.” GW Plastics previously used an outside supplier to produce 3D-printed metal mold components with conformal cooling, which it has tested for up to 100,000 cycles to establish their durability under injection molding pressures. Cycle-time savings with these test molds averaged 25-30 percent, according to Holmes.

Other advantages of 3D printing are parts consolidation in mold building. Optimizing cooling in conventionally machined molds, Holmes explains, can require assembly of multiple components using o-ring seals and special high-conductivity mold materials.

Metal 3D printing can eliminate all that. What’s more, Holmes points out, 3D printing eliminates drilling holes for cooling, ejectors, etc., which can be one of the more expensive operations in mold building.Holmes also notes that in the last five years he has seen a “vast improvement in steel selection for 3D printing,” including grades that provide a higher-quality finish than before. And more are coming, he adds, such as improved grades of stainless steel.

Despite all these advantages of metal 3D printing, Holmes states, “I wouldn't want to use it for everything.” Rather than “grow” entire cores and cavities from sintered metal powder, he targets the technology for inserts in critical areas. The reason, he says, is that metal 3D printing is “a little more expensive than conventional machining, but the payback is certainly worth it.”

One factor is the metal powders, which cost more than conventional mold steels. Another factor is the additional engineering analysis required—“a lot more flow and cooling analysis”—to design metal printed mold components. Although the time to “grow” the laser-sintered metal part and machine it to a rough finish is about the same as for conventional machining, Holmes notes, what adds time and cost are secondary operations on the printed metal parts, such as removing support structures. The net result is 20-25 percent additional manufacturing time for printed metal parts.

“We’ve only had the metal 3D printing machine for a few months, and this is still something of an R&D project,” Holmes says. There’s a lot to learn, such as being able to predict precisely the shrinkage and distortion of printed metal parts. Long-term durability in molding also has yet to be established, but Holmes is confident that printed metal parts will be able to hit the million-cycle benchmark. In any case, printed metal inserts can be replaced by growing new ones.

GW Plastics also recently purchased a 3D plastic printer. Although it is now used mainly to produce “show and tell” parts for product development, Holmes can foresee printing plastic cavities and cores to mold hundreds of parts for prototyping.

This article originally appeared on Plastics Technology’s website.


  • Gas: The Silent Enabler of Additive Manufacturing

    High-end metal additive manufacturing relies on the perfect gas composition to create products that meet the required material properties. But gas such as argon is also key to metal powder production, storage and postprocessing.

  • Highlighting Hybrid Manufacturing

    The winner of the first International Additive Manufacturing Award is a company that developed a head for adding metal additive manufacturing to an existing machine tool.

  • The Future of Manufacturing

    According to engineers with GE Aviation, the challenges of additive metal manufacturing—serious as they are—are small compared to the promise that this technology holds. How else can you make a plane engine 1,000 pounds lighter?

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking / Plastics survey from Additive Manufacturing in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.