This fuel filter base was produced using additive manufacturing instead of casting. Additive offers an advantage in the speed with which it can deliver legacy parts such as the one shown above.
Katie Cattell
Share
According to Caterpillar Inc., buying a 3D printer is only the first step of adopting AM strategies. Organizations must also consider the five W’s of AM: what to print, where to print, who to run the printer, when to print and why to print. The process of implementing AM in an organization is long and involves everyone from the engineers to the manufacturing staff. Stacey DelVecchio, additive manufacturing product manager at Caterpillar, will discuss strategies to use when working around the limiting factors of human capital in order to inform, educate and implement AM in a large-scale organization. Schmidt’s presentation takes place during the upcoming Additive Manufacturing Conference, co-located with IMTS 2016, at 8 a.m. on Wednesday, September 14 in room W375-B.
View the full agenda or register for the conference here. Already registered? Follow @LearnAdditive on Twitter for the latest updates, and use #IMTSadditive to connect with others during the event.
RELATED CONTENT
-
3D Printed Device Expands Ventilator Capacity to Address Shortfall During Coronavirus Crisis
Emergency authorization from FDA allows for use of device permitting four patients to use a shared ventilator. HP involved in mass production via additive manufacturing.
-
10 Valuable Lessons from an Additive Metal Part
If you’re going to use AM for production, the subtractive steps deserve as much consideration as the additive cycle.
-
MarkForged Metal Printer: Sintering Can Wait
Separating 3D printing from high-temperature processing is part of how the company’s Metal X realizes a price less than established metal AM equipment.
.jpg;quality=90)
