10/31/2016 | 1 MINUTE READ

Additive Manufacturing Is Cyclical—Not Linear

The best use of additive manufacturing is in an integrated environment, says Benjamin Fisk of Methods 3D.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Connect at

Methods Machine Tools will be exhibiting new technology at IMTS 2020 in Chicago this September.

Plan to meet up with their team or get registered here!

Additive manufacturing is often thought of as a linear process: A part is designed and built; powder is removed; the part undergoes stress relief, wire EDMing and thermal processing; surface finish is addressed and machining may be necessary; and finally, the part is inspected.

But just because you can make a part additively doesn’t mean you should, says Benjamin Fisk, general manager of 3D Additive Manufacturing at Methods 3D. To truly implement additive manufacturing, a different, fully integrated approach is necessary. Fisk shared what this approach may look like during the most recent Additive Manufacturing Conference.

Integrated additive manufacturing starts with choosing the correct parts for AM—those that have complex internal features, are customized, are made in low-volume quantities or create excess scrap are all good candidates. But those parts must also undergo design for additive manufacturing (DFAM) to ensure success. Build files must be created with powder removal and EDM in mind, for example, and proper design of supports for EDM removal can lead to a finished surface more quickly.

The entire process is cyclical, and additive manufacturing must not be seen as a stand-alone technology. Integration of additive with conventional machining is critical for success, but at the same time an additive system cannot be seen as “just” another machine tool.

“No one machine tool can do it all,” says Fisk. “Additive manufacturing is at the center, but all aspects are interdependent.” 

RELATED CONTENT

  • AM 101: Binder Jetting

    Binder jetting requires no support structures, is accurate and repeatable, and is said to eliminate dimensional distortion problems common in some high-heat 3D technologies. Here is a look at how binder jetting works and its benefits for additive manufacturing.

  • Additive Manufacturing and 3D Printing Are Two Different Things

    And as AM continues to advance, the differences are becoming more pronounced and more important. 

  • What Does It Take to Be Safe?

    The number-one thing a company can do to protect its AM investment and not interrupt production is develop a comprehensive safety policy specifically for additive.


Resources