3D Printing Machine Training
Published

Will the Successes of NASA’s RAMFIRE Project Lead to an Operational Aerospike Engine?

NASA’s RAMFIRE project has additively manufactured a 36-inch diameter aerospike nozzle with complex integral coolant channels for a more efficient way to propel rockets to outer space. NASA engineers will use this as a proof of concept to inform future component designs.

Patrick Callard, Chief Marketing Officer, Elementum 3D

Share

At the RPM Innovation (RPMI) facility in Rapid City, South Dakota, manufacturing for a large-scale aerospike demonstration nozzle with integral channels is underway. The laser powder directed energy deposition (LP-DED) process creates a melt pool using a laser and blows powder into the melt pool to deposit material layer by layer. NASA engineers will use the nozzle as a proof of concept to inform future component designs. Source: RPM Innovation

At the RPM Innovation (RPMI) facility in Rapid City, South Dakota, manufacturing for a large-scale aerospike demonstration nozzle with integral channels is underway. The laser powder directed energy deposition (LP-DED) process creates a melt pool using a laser and blows powder into the melt pool to deposit material layer by layer. NASA engineers will use the nozzle as a proof of concept to inform future component designs. Source: RPM Innovation

NASA continues to reimagine the future of rocket engine technology by accelerating the advancement of lightweight rocket nozzle production with additive manufacturing (AM). The success of NASA’s Reactive Additive Manufacturing for the Fourth Industrial Revolution (RAMFIRE) project established the viability of AM for aluminum rocket nozzles with A6061-RAM2 powder.

Now, the RAMFIRE project has used A6061-RAM2 to 3D print a 36-inch diameter aerospike nozzle with complex integral coolant channels.

For nearly seven decades, rocket engineers have considered an alternate nozzle design beyond the bell nozzle rocket engine. The aerospike design breaks free from the traditional bell nozzle rocket engine design, which is efficient at only one point in the rocket’s trajectory.

What exactly makes this nozzle so enticing, especially after the bell nozzle has more than proven its capabilities throughout the history of human spaceflight?

The Aerospike’s inside-out rocket nozzle plume travels externally, rather than exiting inside of the traditional bell-shaped nozzle. The main advantage of the aerospike nozzle is that, as the rocket climbs, atmospheric and airstream pressure act on the plume to keep it at an optimum setting along the entire trajectory. This enables a very efficient engine performance in flight, capable of delivering higher payloads while decreasing overall rocket weight and improved performance over a range of pressure altitudes.

So, if the aerospike nozzle design is considered a more efficient way to propel rockets to outer space, why has it never been seriously tested on the launchpad?

The lack of actual flight test data has precluded use of these nozzles in current as well as next-generation space launch vehicles. In addition, the configuration of an aerospike nozzle presents unique challenges to the designer and fabricator.

The mindset of the past is changing with the introduction of AM. NASA recently validated data from hot fire tests on its 3D printed aerospike engine and reported that recent advancements in 3D printing can overcome some of the engine’s design challenges — specifically, how to manage its temperature. The positive results have green-lighted NASA engineers to develop a larger version.

1 –  DED-LPB/A6061-RAM2 RAMFIRE Aerospike nozzle after undergoing hot wall polishing via REM Surface Engineering’s Extreme ISF Process. Surface roughness of the hot wall was reduced from Ra ~57 µm to Ra of  ~0.4 µm. Source: RPM Innovation

DED-LPB/A6061-RAM2 RAMFIRE Aerospike nozzle after undergoing hot wall polishing via REM Surface Engineering’s Extreme ISF Process. Surface roughness of the hot wall was reduced from Ra ~57 µm to Ra of  ~0.4 µm. Source: RPM Innovation

NASA’s RAMFIRE (Reactive Additive Manufacturing for the Fourth Industrial Revolution) project commissioned Elementum 3D to work closely with NASA engineers and scientists and RPM Innovations to develop and print a 36-inch diameter aluminum aerospike rocket nozzle out of A6061-RAM2 material. The build was performed using RPM Innovations’ large-format laser powder direct energy deposition (LP-DED) process.

Why has it taken almost 70 years to successfully produce a lightweight, high-strength aluminum rocket engine?

For one thing, conformal cooling channels are needed to keep the nozzle well below the material’s melting temperature. Curved internal voids are a specialty of AM. These would be far more complex to achieve using a casting process and machining them would not be possible. Secondly, metal AM via laser melting processes only became industrialized in the past few decades as computer, automation and laser technology became simultaneously increasingly sophisticated and affordable. And, finally, AM of aerospace-grade aluminum materials has only been possible since Elementum 3D invented its RAM technology in the past decade.

Aluminum alloys are highly prone to a type of cracking called “hot tearing” under the rapid heating and cooling conditions inherent to laser welding processes, and some popular wrought aluminum alloys (including AA6061) are widely considered unweldable for this reason. Elementum 3D’s RAM chemistry serves to control the solidification process, resulting in crack-free, fine-grained microstructures and printed material with strength equal — and, in some cases, superior – to wrought aluminum.

Will the combination of optimized thermal and mechanical properties of A6061-RAM2 generated from RAM technology and the design freedom of AM be the path to an operational aerospike rocket engine?

Only time and further research can answer that question. The research data acquired from the optimization of A6061-RAM2 aluminum alloy for large blown powder DED brings incredible confidence in enabling the production of an operational aerospike nozzle. NASA engineers plan to use the demonstration nozzle as a proof of concept to inform future component designs.

Acquire
SolidCAM Additive - Upgrade Your Manufacturing
World According To
Airtech
The Cool Parts Show
North America’s Premier Molding and Moldmaking Event
AM Radio

Related Content

Brackets

8 Cool Parts From Formnext 2023: The Cool Parts Show #65

New additive manufacturing technologies on display at Formnext were in many cases producing notable end-use components. Here are some of the coolest parts we found at this year’s show.

Read More
Defense

Supernova Creates Defense and Space Business Unit to Develop 3D Printing of Military-Grade Energetic Materials

Target applications for the new business unit include solid rocket motors which are critical components for the next-generation hypersonic platforms.

Read More
Metal

“Mantis” AM System for Spacecraft Uses Induction for Deposition

The metal 3D printing system melts wire without lasers. 30-foot-diameter parts are built on a rotary-feed system that eliminates the need for a large machine frame or gantry.

Read More
Aerospace

Additive Manufacturing at NASA (Part 1): AM Radio #51

In this first episode of a two-part special on additive manufacturing at NASA, we discuss three specific 3D printed parts for upcoming missions and share observations about the organization’s approach to AM. 

Read More

Read Next

Metal

Bike Manufacturer Uses Additive Manufacturing to Create Lighter, More Complex, Customized Parts

Titanium bike frame manufacturer Hanglun Technology mixes precision casting with 3D printing to create bikes that offer increased speed and reduced turbulence during long-distance rides, offering a smoother, faster and more efficient cycling experience.

Read More
Metal

Postprocessing Steps and Costs for Metal 3D Printing

When your metal part is done 3D printing, you just pull it out of the machine and start using it, right? Not exactly. 

Read More
SLS

3D Printed Polymer EOAT Increases Safety of Cobots

Contract manufacturer Anubis 3D applies polymer 3D printing processes to manufacture cobot tooling that is lightweight, smooth and safer for human interaction.

Read More
3D printing machine trainings